NEC PowerMate CT manual Reinstalling the System Board, Locating System Board Screws

Locating System Board Screws

A – System Board Screws

5.Ensuring you do not touch any components, carefully lift the system board out of the chassis.

6.If you are discarding the board, first remove useable memory modules, the processor, or cables, as appropriate.

7.Set the system board aside on a stable static-free surface.

Reinstalling the System Board

NECC recommends that you contact your NECC Technical Support Center for assistance in removing or replacing your system board.

1.Place the system board in the chassis.

The screw holes in the board should align with the holes in the chassis. The back panel connectors should fit perfectly into the back of the chassis.

2.Secure the board to the chassis with the six screws previously removed.

3.Reconnect any cables that were disconnected from the system board.

4.Replace the expansion boards (see “Installing an Expansion Board”).

5.If appropriate, install any memory modules, processor, or cables from a previous board.

6.Replace the system unit cover (see “Replacing the Cover”).

3-32 Disassembly and Reassembly