NEC PowerMate CT manual Using Hard Disk Drive Password Protection, Moving the Hard Drive

3.Highlight Assign HDD Password and press Enter.

!If you enter the current master password, you are prompted to enter a new master password.

!If you enter the current user password, you are prompted to enter the new user password.

!If you do not want to establish a new master or user password, press Esc instead of entering a new password.

4.Save the changes and exit BIOS Setup.

Using Hard Disk Drive Password Protection

To facilitate the transfer of one or more HDDs between systems, establish a single master password (and store the password in a secure place). Forgetting the master password results in the inability to access the data on the hard drive. Establish different user passwords to limit access to specific systems.

If you set the master and user password on a hard drive, you can never remove the passwords. You can change the passwords. If you forget the master password and install the drive in another system, you cannot access the data on the hard drive.

Once you set these passwords, NEC Computers Inc. has no capability of removing them.

If you install the hard drive in another PowerMate system with hard disk drive security enabled, you must enter the password to allow access to the hard drive. If this PowerMate system does not support hard disk drive security, you cannot access the data on the hard drive.

With hard disk drive security enabled on the original NEC PowerMate CT system, the system boots normally.

If you install the hard drive in another NEC PowerMate system with security enabled, you must enter the master password to access the hard drive. If the hard drive is installed in another NEC PowerMate CT system with security disabled, the system prompts you to enter the master password and then a new user password.

Moving the Hard Drive

When a password protected hard drive is moved from its original system and installed in another system, error messages appear indicating that the drive is locked. Next, the Security Setup screen appears requiring the user to enter the master password to unlock the drive. Enter the master password, when prompted.

To take advantage of HDD password protection in another system, the system must be equipped with the same HDD password protection feature. To determine if the system has HDD password protection, check the Security Menu in the BIOS Setup to see if there are provisions for establishing HDD passwords.

2-24 System Configuration