NEC PowerMate CT manual Supervisor, User

	Security Menu Items
Menu Item	Settings (default is bold)
Set Supervisor Password	Press Enter to access.
	Use this field to set or change the supervisor password.
	Press Enter to bring up a dialog box where the password
	can be entered and confirmed.
Set User Password	Press Enter to access.
	Use this field to set or change the user password. Press
	Enter to bring up a dialog box where the password can be
	entered and confirmed.
Security Mode	Press Enter to access the Security Mode.
	Use this mode to select Password (default), SmartCard, or
	FingerPrint. Press Enter to open the selected field.
	Use the SmartCard field to assign access to the SmartCard
	Reader by the supervisor and/or user. Press Enter to bring
	up the SmartCard Reader dialog box for setting up
	SmartCard security.
	The Assign Supervisor SmartCard field controls Supervisor
	access to the BIOS Setup utility and the system. A PIN
	number controls access.
	The Assign User SmartCard field controls user access to the
	system at boot. A PIN number controls access.
Password on Boot	Disabled, Enabled
	When Enabled, requires password entry before boot.
	System remains in secure mode until password is entered.
Fixed Disk Boot Sector	Normal, Write Protect
	Write Protect protects the boot sector on the hard disk from
	viruses.
Diskette Access	Supervisor, User
	Controls access to the diskette drive.
Network Boot Setting	Press Enter to access.
Keyboard/Mouse Lock	Disabled, Enabled
	Select Enabled to lock the keyboard and mouse when
	remote booting.
Virus Check Reminder	Disabled, Daily, Weekly, Monthly
	Displays reminder message at bootup. Message is daily,
	every Monday, or first of every month.
System Backup Reminder	Disabled, Daily, Weekly, Monthly
	Displays reminder message at bootup. Message is daily,
	every Monday, or first of every month.

System Configuration 2-19