2-16 System Configuration
Advanced Menu
Menu Item Settings (default is bold)
Interrupt IRQ5, IRQ7
Selects the IRQ for the LPT port.
Mode Output Only, Bi-directional, ECP, EPP
Selects parallel port mode.
DMA Channel DMA 3, DMA 1
Sets the DMA channel for the parallel port.
Floppy Disk Controller Disabled, Enabled, Auto
Setting at Enabled allows the user to configure the
controller.
Setting at Auto enables the BIOS or operating system to
configure the controller.
Game Port & Midi Auto, Disabled, Enabled
Configures the Game Port
Enabled allows selection of Base I/O Address and Base I/O
Address/IRQ.
Base I/O Address 201, 209, 211, 219
Game port address configuration.
Base I/O
Address/IRQ 330 IRQ_10, 300 IRQ_5, 310 IRQ_10,
320 IRQ_5,
Address configuration for Midi port. The Midi port and Game
port must be Enabled/Disabled at the same time.
Large Disk Access Mode Other, DOS
Select DOS if using DOS operating system.
Select Other if using another operating system such as
UNIX or Novell NetWare.
Local Bus IDE Adapter Disabled, Primary, Secondary, Both
Enables the integrated local bus IDE adapter.
Advanced Chipset Control Press Enter to access the following submenus.
Graphics Aperture 64 Mb, 128 Mb, 256 Mb, 4 Mb, 8 Mb, 16 Mb, 32 Mb
Selects the size of the Graphics Aperture for the AGP video
device.
Enable memory gap Disabled, Enabled
If Enabled, turn system RAM off to free address space for
use with an option card.
Either a 128kb conventional memory gap, starting at 512kb,
or a 1MB extended memory gap, starting at 15MB, will be
created in system RAM.