3-40 Disassembly and Reassembly
Chassis Shell
Note The chassis shell (the U-shaped covering with rubber feet on two sides) should only be
removed by authorized service personnel. No replaceable parts are accessed from this panel,
and it should only be removed if it is being replaced due to damage.
The chassis shell is secured to the chassis with two screws on the rear face of the chassis, and
three screws on the front face of the chassis. Remove all five screws. Carefully slip the shell,
which is slightly flexible, off the corners of the chassis. Lift the chassis out of the shell.

Replacing the Chassis Shell

The chassis shell is secured to the chassis with two screws on the rear face of the chassis and
three screws on the front face of the chassis. To replace the chassis shell, orient it so its screw
holes align with the screw holes on the front and rear faces of the chassis. Place the chassis in
the chassis shell, and fit the corner edges of the shell over the chassis. Secure the shell to the
chassis with the five screws.