NEC PowerMate CT manual Mouse Cleaning, Locating the Mouse Ball Cover

Mouse Cleaning

The mouse has a self-cleaning mechanism that prevents a buildup of dust or lint around the mouse ball and tracking mechanism under normal conditions. Periodically, however, the mouse ball must be cleaned. Use the following procedure to clean the mouse.

Note The following procedure describes the general procedure for cleaning a typical mouse. Depending on the mouse you have, the procedure and mouse configuration might differ from the following.

1.Unplug the mouse from the system.

2.Turn the mouse upside down and locate the ball cover.

3.Turn the ball cover counterclockwise and remove the cover.

Locating the Mouse Ball Cover

A – Mouse Ball Cover

4.Turn the mouse over and remove the ball.

5.Clean the mouse as follows:

!Clean the mouse ball with tap water and a mild detergent, then dry it with a lint-free cloth.

!Remove any dust and lint from the mouse socket.

!Use a Q-tip to remove accumulated dirt.

6.Replace the mouse ball in its socket.

7.Replace the ball cover and turn it clockwise until it locks in place.

8.Connect the mouse to the mouse port.

9.Plug in the AC power cord and press the power/sleep button.

Preventive Maintenance 6-3