NEC PowerMate CT Replacing the Cover, Removing the Cover, Side Slots and Tabs, Locking Tab hidden

Removing the Cover

Replacing the Cover

Replace the cover as follows.

Ensure that all cables inside the chassis are positioned to prevent crimping, abrasion, or cutting while installing the cover. Check that the ribbon cables are folded along their fold lines and out of the direct path of the cover.

1.Position the cover over the side of the chassis so that the back edge of the cover is about an inch beyond the back edge of the chassis (see the following figure).

2.Align the tabs and slots on the cover with those along the edges of the chassis.

3.Align the locking tab slot at the bottom rear of the cover with the locking tab.

Replacing the Cover

A – Side Slots and Tabs	C – Front Slots and Tabs
B – Locking Tab (hidden)

3-4 Disassembly and Reassembly