Panasonic KX-T61610 Next C Memory END Until the desired memory, Next 8.HW%-H, Which start with

01

[12][NEXT] [C] [MEMORY] [END] -.

:................ until the desired memory

Description

For Service Class 2 or 3 (see “Toll Restriction”) up to 10 or 20 phone numbers can be selected for use in toll dialing.

Phone numbers programmed will be denied. Ali extensions programmed for Service Class Selec- tions shall be assigned to the same denied code assignment plan.

Memory locations 00-09 are restricted by classes 2 and 3.

Memory locations lo-19 are restricted by only class 3.

Programming

11. Dial (12).

“ENTER CODE NO.” will be displayed.

2. Dial the memory location number (00 through 19) or press the NEXT button. Example:

When dial (00) or press the NEXT button;

-When nothing is stored in memory location number “OO”, “0O:NOT STORED” is dis- played.

-When the dial number lGHG+++?H% has been stored, “OO:l?H%++cJc++” will be dis- played.

3.Dial the 7-digit phone number.

l T6 erase a wrong entry, press the CLEAR button.

4.Press the MEMORY-hutton.

l The MEMORY indicator will be lit.

>

location number appears

5.To advance to the next memory location num- ber, press the NEXT button.

To return to the previous memory location number, press the PREV button.

To go to a desired memory location number, press the SELECT button and dial the mern- ory location number.

6.Repeat steps 3 to 5.

7.To return to the initial programming mode, press the END button.

Conditions

l Each phone number should consist of 7 digits. l ‘r*jCt’ substitutes for any numbers, see the fol-

lowing example.

Example:

To deny extension 14 to have access to the phone number 09 and 8 in the service class 2.

Step l...[ll] [14] [SELECT] [MEMORY] [END] Step 2...[12] [NEXT] [09WHG+*]

	[MEMORY]	[NEXT] [8.HW%-H]
	[MEMORY]	[END]
	09XXCiCJCJC...disables the phone numbers
	which start with 09.
..	8jC*G%CSCJCJC...disablesthe phone numbers
I	which have 8 on thefirst digit.
		/

Programming	Table
See page 37.	.’