Panasonic KX-T61610 manual Wll WI, To erase a wrong entry Press

Description

There are 12 memory locations for automatic dialing available. Up to 32 digits can be srored

into each of the 12 tnetnory locarions. Pushing [he “*Jc”, “#O, “-3s) “FLASH” or “PAUSE”

button counrs as I digit.

l For your convenience, program pri\*are phone numbers into the KX-T61630, KX-T61620, KX- T61650, KX- T30830, KX- T30820 or KX-T308JO.

Programming

Be sure rhe handset is in [he cradle and rhe

SP-PHONE or MONITOR button is OFF.

1.Set the MEMORY switch to “PROGRAM”.

“PROGRAM MODE” will be displayed.

2.Press a programtnabie feafllre button.

The LCD will show “MOI: IVOTSTORED” when nothing is stored in the programmable feature button “01”.

When automatic line access nutnber 9 and the phone number 123-4.56-7890 has been stored, “11101: -123-456-7890” will be displayed.

3.Enter [he line access nunlbtr.

9:automatic line access tti~tnbcr

81:line access number of CO I

82:line access tlumber of CO 2 S3: line access nrlmber of CO 3

84:line access number of CO 4

85:line access number of CO 5

86:line access number of CO 6

4.Enter rhe phone number.

l You may etirer putic~1rrrtiotl.s drlring N phone number.

The SNR button is used	as the	“-”	button.
l To erase a wrong entry,	press	the	CLEAR
buuon.

The TRANSFER button is used as the CLEAR burton.

5. Press the MEMORY blrtrott.

The MEMORY indicator will be iir.

Dialing

1.Lift rhe handset or press rhe SP-PHONE butron.

2.Press a programmable feature burton.

~You may press the CO burton to select the CO line direcriy after lifting rhe handset ot press the SP-PHONE button.

Conditions

aUse the ” 0 “, or ” a ” button for scrolling the display from side to side.

lThe dialed phone number will be displa-ved on the LCD of the KX-T61630/KX-T30830.

l The combinations of speed dialing. one-touch dialing and manual dialing is possible.

eThe line access number (9 or 81 through 86) should be stored.

l Continuous use of tine rouch dialing is possi- ble.

Example:

Wll WI

In this case, programmable feature brrrton “02” should not include the line access number.

l When dialing, the pause is aulomatically entered after line access number (9 or 81 rhrough 86).

*Features that can be accessed by using the dialing button 01~0 can be programmed into memory.

Refer to “One Touch Access for System Fearures” page 4-23.

Examples:

Automatic line access number 9 and phone nurnber 123-4567 into the programmable fea- ture button “01”.

Progranitning

Set the MEMORY switch to “PRO- GRAM” position.

[Ol] [9] [123-45671 [MEMORY]

Return the MEMORY switch to “SET’ position.

6. Repear steps 2 lo 5, to program on orhet
programmable	fearfrrre buttons.

Dialing

--

7. After programming all Ihe numbers, return

the MEMORY swirch to rhe “SET” position.

The MEMORY indicator will go out.

Lift the handset.

Dial [Ol]

lYou may. press the CO button fo select the CO line directly after lifting the handset.

4-5