Panasonic KX-T61610 manual Notstored ‘If already stored

I. Turn the Power-Switch to ON , . . . . . . . . . . . . . . . . . . . . . . . . .

2.Set the System Program Switch to PROGRAM , . . . . . . . . . . .

The LCD on the KX-T61630 will show “ENTER PGM CODE”.

@Be sure the handset of extension 11 is in the cradle and the speakerphone button off.

3.To program automatic line access number 9 and the phone number 987-654-3210 speed access code 00. (Refer to page 3-5.)

KX-T61630 at extension I1 (Extension 11 must be a KX-T61630.)

Dial (01) or press the A UT0 button.

Press the NEXT button.

Dial (00) or press the NEXT button.

l-

Display

C) SPEED DIALING ] IENTER SPEED CODE ‘If nothing is stored in access code “OO”,

100: NOTSTORED ] ‘If already stored the

automatic line access number 9 and the phone number

I123-456-7890,

00: -123-456-7890

While programming if a mistake is made,

@	Press “-‘I button.		00: -987-654-3210 1
@	Dial	“654”.
@	Press “-“button,
@	Dial	“3210”.

Press the MEMORY	100: -987-6.54-3210 1
button.

I

lTo program the next access code, press the NEXT

button.

lTo program a desired access code, press the SELECT button and then dial the number.

*

4. Return the System Program Switch to SET

qTo make program change, start from the beginning.

1.Press the “END” button.

2.Start programming procedure from the beginning.

eYou will hear a beep after pressing the MEMORY button.

*The MEMORY indicator light will go on

when thF.MEMORY button is pressed, and then the Indicator light will go out when the NEXT or PREV button is pressed.

- -

3-3