Panasonic KX-T61610 manual To terminate the original call and talk to the new caller, On Hold

To terminate the original call and talk to the new caller.

-

WILL HEAR A	PRESS “CO” OR “ICM”	TALK
CALL WAITING	WHOSE INDICATOR
TONE	IS FLASHING
	CIUICKLY

To place the original call on hold and talk to the new caller. elf both original call and new call are intercom calls:

(The ICM indicator will change lighting intoflashing quickly when new call reaches.)

WILL HEAR A	PRESS	CONSULT	WITH	PRESS “ICM”		TO
CALL WAITING	“HOLD”	THE NEW CALLER		TERMINATE		THE
TONE		WH!LE THE		2ND CALL AND TO
		ORIGINAL	CALL IS	RETURN	TO THE
		ON HOLD		ORIGINAL	CALL

*If original call is CO call, and new call is CO call or intercom call: or

If original call is intercom call and new call is CO ca’ll:

WILL	HEAR A	PRESS	PRESS “CO” OR “SM”
CALL	WAITING	“HOLD”	WHOSE INDICATOR‘
TONE			IS FLASHING
			OUICKLY

ON HOLD

II PRESS “CO” or”lCM” WHOSE INOICATOR IS FLASHING SLOWLY TO TERMINATE THE 2ND CALLAND TO RETURN TO THE ORIGINAL CALL

Description

Call-waiiing tone during a conversation indi- cates there is a new incoming CO line call or Intercom call.

This feature is required to be set beforehand in the KX-T61610.

For programming, see page 3-28.

Operation

To ierminate the original chll and talk tq the new caller.

1. You will hear a call waiting tone (3 beeps). 2. Press the CO or ICM button whose indicator is flashing quickly. The original call is now

terminated.

3. Start f&king. _._._

To place-the ariginal call on hold and talk to’ the. new caller.

“If both original call and new call are intercom tails:

(Th‘e ICM indicator will chpnge lighting into’ flashing quickly when new call reaches.)

1.You will hear a call waiting tone (3 beeps).

2. Press the HOLD button for placing a con-

versation on hold. 4-16

3.Consult with the new caller.

4.Press the ICM button to terminate the second call and to return to the original call.

@Iforiginal call is CO call, and new call is CO call ‘or intercom call:

or

If original call is intercom call and new call is co call:

1.You will hear. a call waiting tone.

2.Press the HOLD button for placing a ‘conversation on hold. .

3.Press the CO or ICM button whose indicator is f7ashing quickly.

4.Consult with the new caller.

5.Press the CO or ICM button whose indicator

is flashing slow&&-terminate the.second call and to return t?-&e original call.

Conditions ’

e/f a call waiting tone is heard and the CO ot ICM indicator does not flash, this tone indicates a “call waiting tone by _special company service.

In this case, see “Call Waiting-Outside

Line” on page 4-24. - -