Revision D 12/09 |
|
|
|
| Chapter 4: Programming Commands | 41 | |
|
|
|
|
| |||
Font and lines per inch (LPI) setup for different emulations |
|
|
|
| |||
|
|
|
|
|
|
|
|
Emulation | LPI | Font(s) | Font | Default | Default | Comments |
|
Mode | Options | Options | Size | LPI | EDR |
|
|
A799 native | 6.00, 6.77, 7.52, 8.13 | Standard | 13x24 | 7.52 | 3 | Default setup for monochrome paper |
|
|
| Tall | 13x27 | 6.77 | 3 |
|
|
|
| ColorPOS® | 13x27 | 6.77 | 3 | Default setup for |
|
A794, A793 | 6.00, 7.52, 8.13 | Standard | 13x24 | 7.52 | 3 |
|
|
emulation |
|
|
|
|
|
|
|
LEGACY | 6.00 | Tall | 13x27 | 6.00 | 7 | Default setup for LEGACY emulation |
|
emulation |
|
|
|
|
|
|
|
| Standard | 13x24 | 6.00 | 10 |
|
|
|
|
|
|
|
| |||
Set interpretation of “Set current color” command |
|
|
|
| |||
ASCII | US ETX SYN ENQ n |
|
|
|
|
|
|
Hexadecimal | 1F 03 16 05 n |
|
|
|
|
|
|
Decimal | 31 03 22 05 n |
|
|
|
|
|
|
Value of n: |
|
|
|
|
|
| |
| n = 01 will cause 1B 72 01 to print red. Any other value for 1B 72 will print black. |
| |||||
| n = 00 will cause 1B 72 00 to print red and all other values to print black. |
| |||||
This command defines how to interpret the 1B 72 command for legacy environments. It provides a method to resolve any differences in the definition of command 1B72 between the A799 native mode and earlier implementations in other printers.
In A799 native mode, the standard “Set current color” command should be used.
Related information
The 1F 03 16 00 command disables this and all other LogoEZ® features.
To disable one LogoEZ® feature when multiple LogoEZ® features are set, first disable all LogoEZ® features and then re- enable only those you desire.
Print test form
ASCII | US t |
Hexadecimal | 1F 74 |
Decimal | 31 116 |
Prints the current printer configuration settings on the receipt.
Disabled in page mode.
