84 Chapter 4: Programming CommandsRevision D 12/09
Transmit printer ID
ASCII | GS I n | |
Hexadecimal | 1D 49 n | |
Decimal | 29 73 n | |
Value of n: | 1, 49 | = Printer model ID |
| 2, 50 | = Type ID |
| 3, 51 | = ROM version ID |
| 4, 52 | = Logo Definition |
Transmits the printer ID specified by n as follows:
n | Printer ID | Specification | ID (Hexadecimal) |
|
|
| |
1, 49 Printer model ID | A799 | 0x24 | |
2, 50 | Type ID | Installed options | Refer to below |
3, 51 | ROM version ID | ROM version | 0x00 |
4, 52 | Logo definition | Logo definition | Refer to next |
|
|
| column |
n = 2 or 50: Type ID
Bit | Off/On | Hex | Decimal | Function |
|
|
|
|
|
0 | Off | 00 | 0 | No |
| On | 01 | 1 | |
1 | Off | 00 | 0 | No knife installed. |
| On | 02 | 2 | Knife installed. |
2 | – | – | – | Undefined. |
3 | – | – | – | Undefined. |
4 | Off | 00 | 0 | Not used. Fixed to Off. |
5 | – | – | – | Undefined |
6 | – | – | – | Undefined |
7 | Off | 00 | 0 | Not used. Fixed to Off. |
n = 4 or 52: Logo Definition |
| |||
|
|
|
|
|
Bit | Off/On | Hex | Decimal | Function |
|
|
|
|
|
0 | Off | 00 | 0 | No logo downloaded (SRAM or Flash) |
| On | 01 | 1 | Logo downloaded (SRAM or Flash) |
Off | 00 | 0 | Not Used. Fixed to Off. | |
Transmits the printer ID specified by n. This command is a batch mode command; that is, the response is transmitted after all prior data in the receive buffer has been processed. There may be a time lag between the printer receiving this command and transmitting the response, depending on the receive buffer status.
