Revision D 12/09 | Chapter 4: Programming Commands 97 |
Third byte (paper sensor information)
Bit | Off/On Hex | Decimal | Status for USM | |
0 | Off | 00 | 0 | Receipt paper adequate |
| On | 01 | 1 | Receipt paper low (if paper low sensor enabled) |
1 | Off | 00 | 0 | Receipt paper present |
| On | 02 | 2 | Receipt paper low (if paper low sensor enabled) |
2 | Off | 00 | 0 | Receipt paper present. |
| On | 04 | 4 | Receipt paper exhausted. |
3 | Off | 00 | 0 | Receipt paper present. |
| On | 08 | 8 | Receipt paper exhausted. |
4 | Off | 00 | 0 | Not used. Fixed to off. |
5 | – | – | – | Undefined |
6 | – | – | – | Undefined |
7 | Off | 00 | 0 | Not used. Fixed to off. |
Fourth byte (paper sensor information) | ||||
|
|
| ||
Bit Off/On Hex | Decimal | Status for USM | ||
0 | – | – | – | Undefined |
1 | – | – | – | Undefined |
2 | – | – | – | Undefined |
3 | – | – | – | Undefined |
4 | Off | 00 | 0 | Not used. Fixed to off. |
5 | – | – | – | Undefined |
6 | – | – | – | Undefined |
7 | Off | 00 | 0 | Not used. Fixed to off. |
