TANDBERG 1000 Power up, View a still image, Select entry to edit with number keys or, Menu System

	Power up
• Power up the monitor.
• Power up the codec (inside the trolley).	On/Off

ACCEPT

• Check network by pressing END CALL(a dial-tone should be heard).

• Adjust camera positions, audio and videosources. UseSELFVIEW to check outgoing video.

Still Image/Freeze

GRAPHICS

Transmit a still image/freeze video: FREEZE

GRAPHICS

FREEZE

Unfreeze video:

FAR END VIDEOGRAPHICS

Request a still image: CAMERA+SOURCE +source+ FREEZE

	VIDEO
View a still image:	SOURCE + 0

To stop viewing the still image press any key.

Still Image Setup

Press MENU ,'Utilities', 'Presentation Settings'

Presentation Mode:

GRAPHICS

Normal : A still image is sent when FREEZE is pressed.

GRAPHICS

Preview : The image is displayed when FREEZE is

GRAPHICS

pressed. Pressing FREEZE once more will send the still

image.

The Still Image Source setting is used to select which video source the still image will be sent from.

Store Numbers in Directory

• Select 'Edit Directory' from the main menu (see below for how to use the Menu System).

UP DOWN	+	OK
• Select entry to edit with number keys or		.
OK		OK

• Press to edit name. Select letters by pressing .

OK

Move to 'Store' and press when finished.

• Move to 'Number' and use the number keys to enter the ISDN number.

OK

• Press to store.

• Press	MENU	DIRECTORY to activate stored number.
	to exit and

Store Presets

• Adjust camera position or select video input

(see own menus)

MENU

• Select audio source: + 'Audio Setup'. Select source. Press MENU to exit Menu System.

• Store selection:

STORE	P1 P2 P3 P4
+	or key 0-9

Menu System

MENU

Press to enter the Menu System.

UP

Use LEFT OK RIGHT to highlight option.

DOWN

OK

Press to select.

MENU

Press to exit the Menu System.