Sony XR-C400 Maintenance, Dismounting the unit, The rotary commander labels

12
Actual total number: Sony XR-C400 (E) 3-810-309-11 (2)
EN
Maintenance
Fuse Replacement
When replacement the fuse, be sure to use one
with the correct amperage which is started on
the fuse case. Never use a fuse whose
amperage rating exceeds the one supplied to
the unit as this could cause a malfunction of
the unit.
Warning
Use a fuse with the specified amperage.
Use of a fuse with higher amperage may cause
serious damage.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing (RELEASE),
then detach it and clean with a cotton swab
dipped in alcohol. Do not apply too much
force. Otherwise, the connector may get
damaged.
Dismounting the unit
1
2
3
4
Release key (supplied)
Main unit
Back of the front panel
The rotary commander
labels
You can control this unit with the optional
rotary remote (RM-X2S).
Some labels are supplied with the rotary
remote. Attach that label which matches the
functions of the master unit and the mounting
position of the rotary remote.
When you mount the rotary remote, attach the
label in the illustration below.
SEL
LIST
MODE
SEL
LIST
MODE