Konica Minolta C20P manual Dual In-Line Memory Module Dimm, Installing a Dimm, 220

Dual In-Line Memory Module (DIMM)

" You may need additional memory (DIMM) for complex graphics and for duplex (double-sided) printing.

Dual in-line memory module (or DIMM) is compact circuit board with sur- face-mount memory chips.

There is 256 MB of onboard memory and one available memory expansion slot. the memory can be expanded to a maximum of 768 MB (256 MB + 512 MB).

Installing a DIMM

Note

It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 219. In addition, always handle circuit boards by the edges only.

1 Turn off the printer and discon- nect the power cord and inter- face cables.

2 Using a screwdriver, remove the screw. Then, slide the rear cover to the right and remove it.

220 Dual In-Line Memory Module (DIMM)