Konica Minolta C20P manual Replacing the Backup Battery, 154

20 Reconnect the power cord, and turn on the printer.

21 Reset the counter in the MAINTENANCE MENU/SUPPLIES/ REPLACE/TRANS. BELT menu.

Replacing the Backup Battery

When the backup battery is at its end of life, the printer’s date and time can- not be retained. Follow the procedure described below to replace the backup battery.

Note

Only use the coin-shaped 3V lithium battery CR2032. It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 219. In addition, always handle circuit boards by the edges only.

1 Turn off the printer and discon- nect the power cord and inter- face cables.

154 Replacing Consumables