Konica Minolta C20P Job, Time, OUT Ether TCP/IP Enable, Net, Address, OFF Subnet, Mask, Gateway

" All factory default values are shown in bold.

JOB	Settings	5 seconds-15seconds-300 seconds
TIME-
	Specify the timeout interval for a print job being received.
OUT
ETHER-	TCP/IP	ENABLE	Settings	YES/NO
NET
			If YES is selected, TCP/IP is enabled.
			If NO is selected, TCP/IP is disabled.
		IP	Setting	000.000.000.000
		ADDRESS
			Set the IP address for this printer on the
			network.
			Use the	,	,	, and	keys to
			specify the value.
			If the IP address is manually specified,
			DHCP/BOOTP is automatically set to
			OFF.
		SUBNET	Setting	000.000.000.000
		MASK
			Specify the subnet mask for the network.
			Use the	,	,	, and	keys to
			specify the value.
		DEFAULT	Setting	000.000.000.000
		GATEWAY
			Specify the IP address of the router if
			one is on the network. Use the , ,
			, and		keys to specify the value.
		DHCP	Settings	ON/OFF
			Select whether or not the IP address is
			automatically acquired.
			If ON is selected, the IP address is auto-
			matically acquired.
			If OFF is selected, the IP address is not
			automatically acquired.

70 Configuration Menu Overview