Konica Minolta C20P manual Transparencies, 106, Do not use postcards that are

Use postcards that are

„Approved for laser printers

DO NOT use postcards that are

„Coated

„Designed for inkjet printers

„Precut or perforated

„Preprinted or multicolored

" If the postcard is warped, press on the warped area before putting it in Tray 1.

Transparencies

"

"

"

Do not fan transparencies before loading them. Resulting static elec- tricity may cause printing errors.

If you touch the face of the transparencies with your bare hands, print quality may be affected.

Keep the printer path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 9, “Maintaining the Printer” .

" Remove transparencies as soon as possible from the output tray to avoid static buildup.

You can print continuously with transparencies. However, this could affect the media feed, depending on the media quality, static buildup, and printing envi- ronment.

Try printing your data on a sheet of plain paper first to check placement.

" If you have problems feeding 20 sheets, try loading only 1–10 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, thus causing feeding problems.

Capacity	Tray 1	Up to 20 transparencies, depending on their
	(Manual Feed	thickness
	Tray)
	Tray 2/3	Not supported
Orientation	Face down
Driver	Transparency
Media Type
Duplexing	Not supported

106 Media Types