Konica Minolta C20P manual Error Messages Operator Call, Status, Error, and Service Messages

Error Messages (Operator Call:			)
	This message...	means...		do this...
	COVER OPEN	The printer’s front		Close the front cover.
	FRONT COVER	cover is open.
	COVER OPEN	The printer’s right		Close the right side
	SIDE COVER	side cover is open.		cover.
	COVER OPEN	The right side cover		Close the right side
	TRAY3 COVER	of Tray 3 is open.		cover of the tray.
	HOLD JOB ERROR	The specified print job		Print jobs can be saved
	UNABLE TO	saved on the hard		only if a hard disk is
	STORE JOB	disk is sent while the		installed. If desired,
		hard disk is not		install a hard disk.
		installed.
	HOLD JOB ERROR	When printing a		Change the printer con-
	“OPTIONAL”	stored job, the printer		figuration to that when
	PRESS CANCEL	configuration was		the job was stored.
		changed since the job
		was stored.
	MANUAL EMPTY	Tray 1 was specified		Load the correct media
	“SIZE”	with the printer driver		into Tray 1.
	“MEDIA”	as Manual Feed for
		printing, but Tray 1 is
		empty.
	MANUAL FEED	The Paper Source in		Press the key to
	“SIZE”	the printer driver is		print, or remove and
	“MEDIA”	set to Tray 1 (Manual		reload the media in Tray
		Feed), but there is		1.
		already media in the
		tray when printing
		begins.
	MEMORY FULL	The printer has		Press the Cancel key to
	PRESS CANCEL	received more data		cancel the print job.
		than can be pro-		Decrease the amount of
		cessed with its inter-		data to be printed (for
		nal memory.		example, by decreasing
				the resolution), and then
				try printing again.
				If that doesn’t solve the
				problem, install an
				optional memory mod-
				ule.

210 Status, Error, and Service Messages