Konica Minolta C20P manual Selecting Driver Options/Defaults for Windows

Selecting Driver Options/Defaults (for Windows)

Before you start working with your printer, you are advised to verify/change the default driver settings. Also, in case you have options installed, you should “declare” the options in the driver.

Windows Vista/XP/Server 2003/2000 (KONICA MINOLTA bizhub C20P PCL6, KONICA MINOLTA bizhub C20P PS)

1 Choose the driver’s properties as follows:

–(Windows Vista)

From the Start menu, click Control Panel, then Hardware and Sound, and then click Printers to open the Printers directory. Right-click the KONICA MINOLTA bizhub C20P PCL6 or KONICA MINOLTA bizhub C20P PS printer icon, and then click Properties.

–(Windows XP/Server 2003)

From the Start menu, choose Printers and Faxes to display the Printers and Faxes directory. Right-click the KONICA MINOLTA bizhub C20P PCL6 or KONICA MINOLTA bizhub C20P PS printer icon and choose Properties.

–(Windows 2000)

From the Start menu, choose Settings and then Printers to display the Printers directory. Right-click the KONICA MINOLTA bizhub C20P PCL6 or KONICA MINOLTA bizhub C20P PS printer icon and choose Properties.

2 If you have installed options, proceed with the next step. Otherwise, skip to step 9.

3 Select the Configure tab.

4 Check that the installed options are correctly listed. If not, proceed with the next step. Otherwise, continue with step 8.

5 Click the Refresh to automatically configure installed options.

" The Refresh is available only if bi-directional communication is available with the printer; otherwise it is grayed out.

6 From the Device Options list, select an option, one at a time, and then select Enable or Disable from the Settings menu.

" If Printer Memory is selected, select 256 MB, 512 MB or 768 MB according to the installed memory. The factory default setting is 256 MB.

12 Selecting Driver Options/Defaults (for Windows)