Duplexing
Select paper with high opacity for duplex
Opacity refers to how effectively paper blocks out what is written on the oppo- site side of the page. If the paper has low opacity (high translucency), then the printed data from one side of the page will show through to the other side. Check your application for margin information. For best results, print a small quantity to make sure the opacity is acceptable.
Note
Only plain paper,
Duplexing envelopes, labels, postcards, thick stock, glossy media or transparencies is not supported.
How do I autoduplex?
Check your application to determine how to set your margins for duplex
The following Binding Position settings are available.
1 
2 1 3
1
2
If “Short Edge” is selected, the pages will be laid out to flip at the top.
If “Long Edge” is selected, the pages will be laid out to flip at the side.
1 3
122 | Duplexing |
