Konica Minolta C20P manual Replacing a Imaging Unit, Replacing Consumables 135

Replacing a Imaging Unit

When replacing a imaging unit, refer to the following table. For optimum print quality and performance, use only approved KONICA MINOLTA imaging units for your specific printer type, as listed in the table below. You can find your printer type and the imaging unit part numbers on the consumables reorder label inside the front cover your printer.

Printer	Printer Parts	Imaging Unit Type	Imaging Unit
Type	Number		Parts Number
		Imaging Unit - Black (K)	A031	00G
AM	A00F 014	Imaging Unit - Yellow (Y)	A031	05G
		Imaging Unit - Magenta (M)	A031	0AG
		Imaging Unit - Cyan (C)	A031	0GG
		Imaging Unit - Black (K)	A031	00J
EU	A00F 024	Imaging Unit - Yellow (Y)	A031	05J
		Imaging Unit - Magenta (M)	A031	0AJ
		Imaging Unit - Cyan (C)	A031	0GJ

Note

Do not touch the OPC drum surface. This could lower image quality.

P

USH

Y

If I-UNIT LOW on the SYS DEFAULT MENU/ENABLE WARNING is set to ON, the message I-UNIT LOW X (where “X”. represents the color of the toner) appears when a imaging unit becomes near empty. Follow the steps below to replace the imaging unit.

" You are advised to replace the indicated imaging unit when the mes- sage I-UNIT LIFE X appears.

1 Check the message window to see which color imaging unit needs replac- ing.

Replacing Consumables 135