Konica Minolta C20P manual Con, Tinue, Hold, Energy, Saver, Menu

AUTO	Settings	ON/OFF
CON-
	Select whether or not printing continues if the size or type of
TINUE	media in the selected tray is different from the size or type of
	media for the print job.
	If AUTO CONTINUE is set to ON, printing automatically contin-
	ues after about 10 seconds under the following conditions. At
	this time, printing will be performed even if the media size is dif-
	ferent.
	No media: PAPER EMPTY (Page 211)/TRAY EMPTY (Page
	213)
	Different media size/type: PAPER ERROR (Page 211)/TRAY x
	PAPER ERR (Page 213)
HOLD	Settings	DISABLE/1 hour/4 hours/1 day/
JOB		1 week
TIME
	Specify the length of time until print jobs saved on the hard disk
OUT	are deleted. If DISABLE is selected, print jobs are not deleted
	at a specific time.
ENERGY	Settings	ON/OFF
SAVER
	If ON is selected, the machine enters Energy Saver mode
	according to the length of time specified for ENERGY SAVER
	TIME.
	If OFF is selected, the machine will not enter Energy Saver
	mode.
ENERGY	Settings	5 minutes/6 minutes/7 minutes/8
SAVER		minutes/9 minutes/10 minutes/11
TIME		minutes/12 minutes/13 minutes/14
		minutes/15 minutes/30 minutes/
		1 hour/3 hours
	Specify the length of time until the machine enters Energy
	Saver mode.
	This menu item appears only when ENERGY SAVER is set to
	ON.
MENU	Settings	OFF/1 minute/2 minutes
TIME
	Specify the length of time until the status screen is displayed
OUT	when no operation is performed while a menu or help screen is
	displayed in the message window. If OFF is selected, no
	timeout occurs.

84 Configuration Menu Overview