Replacing the Transfer Belt Unit

When the time to replace the transfer belt unit is reached, the message TRANS. BELT/END OF LIFE appears. Printing can continue even after this message appears; however, since the print quality is reduced, the trans- fer belt unit should be replaced immediately.

1 Turn off the printer and discon- nect the power cord and inter- face cover.

2 Open the printer’s front cover.

3 Remove the all imaging units and waste toner bottle.

" For details on removing the imaging unit or waste toner bottle, refer to “Replacing a Imaging Unit” on page 135 or “Replacing the Waste Toner Bottle” on page 141.

" Cover the removed imag- ing unit to protect it from direct sunlight.

148

Replacing Consumables

Page 162
Image 162
Konica Minolta C20P manual Replacing the Transfer Belt Unit, 148