Comparing State Traces
Run the Analyzer and Find the Errors
Run the Analyzer and Find the Errors
Now that you have changed the jumper, you are ready to acquire a different state listing and compare it to the previous listing. In this exercise, you will switch to the Difference Listing, press the Run key to acquire the new state listing, and use the knob to scroll through the differences between the two listings.
1Highlight the Reference Listing field, and press the Select key to switch to the Difference Listing.
2Press the Run key.
The listing now shows the data that you just acquired. The analyzer compares this data to the data that you stored in the Reference Listing.
3Highlight the Find Error field.
4Use the knob to scroll through the listing. Observe the states where one of the hex numbers is white.
The white color indicates states in the new listing that do not match the reference listing. You can also type a number into the Find Error field. Find Error will jump you to that error if it exists in the listing.
The Difference Listing |
|
displays the listing you |
|
want to compare. |
|
The Find Error field is |
|
used to scroll through |
|
the differences between |
|
the listings. |
|
The incorrect bytes |
|
are displayed in white |
|
on your display. In |
|
this graphic, the |
|
white text is | Difference Listing |
represented by the | |
light black font. | Return the Glitch Jumper on the training board to the OFF position. |
5 |
6 Press the List MENU key. Choose Listing MACHINE 1 from the
Steps 5 and 6 reset the training board and the analyzer for the next exercises.