Introduction to State Analysis

Create Additional Symbols

Create Additional Symbols

You can create as many symbols as you want. In this exercise, you will create symbols TWO and THREE for the hex values 02 and 03.

1If the Symbol Table pop-up menu is now displayed, go to step 2. If this is not the case, highlight the Symbols field in the Format Menu, and press the Select key.

2Highlight the ONE field below Symbol, and press the Select key. Highlight Add a Symbol in the pop-up menu, and press the Select key. Type TWO using the keypad. Press the Done key when you are finished typing.

3Highlight the field to the right of the TWO under Pattern/Start. Enter 02 using the keypad. Press the Done key when you are finished typing.

4Highlight the TWO field. Repeat steps 2 and 3 to create a symbol, THREE, with a pattern value of 03.

5Press the Done key to close the Symbol Table pop-up menu.

The symbol TWO represents the hex value 02.

The symbol THREE represents the hex value 03.

 

Creating Additional Symbols

Result

In the state listing, the analyzer will display TWO in place of the hex number

 

02, and THREE in place of the hex number 03, when the base field is set to

 

Symbol.

 

 

 

3-13