Triggering the Oscilloscope with the Timing Analyzer

Turn On the Timing Analyzer

Turn On the Timing Analyzer

Now you will begin to set up the timing analyzer to capture the glitch.

1Highlight the Scope field and press the Select key. Highlight Analyzer in the pop-up menu, and press the Select key.

2Press the Config MENU key.

If the Configuration menu is already displayed when you press the Config key, then a pop-up menu will appear. Choose Configuration from the pop-up menu.

3Highlight the field to the right of Type in the Analyzer 1 box and press the Select key. Highlight Timing in the pop-up menu, and press the Select key.

Result

Analyzer 1 is set to timing mode.

8-8