Triggering the Oscilloscope with the Timing Analyzer
Capture the Glitch with the Timing Analyzer and Oscilloscope
Capture the Glitch with the Timing Analyzer and
Oscilloscope
The timing analyzer runs, triggers, and then arms the oscilloscope. Notice the slight delay between the glitch displayed by the timing analyzer and the oscilloscope. This is caused by the intermodule bus when one instrument arms another. In the following exercise, you will align the glitch in the two displays.
1Highlight the Group Run field, and press the Select key. Highlight Single in the
2Highlight the s/Div field, then rotate the knob to change the s/Div to 20 ns.
You will now see the glitch on both the oscilloscope waveform, and on TCOUNT 7 in the timing analyzer section of the display.
The glitch captured by the timing analyzer.
The glitch captured by the oscilloscope.
Capturing the Glitch on the Oscilloscope
Result | The glitch is captured and displayed by the analyzer and oscilloscope. |