Triggering the Oscilloscope with the Timing Analyzer
Set the Jumpers
Set the Jumpers
You will create the glitch on bit 7 of the counter on the training board by setting the glitch jumper to ON.
•Set the jumpers as shown below.
For more information about setting the jumpers, refer to chapter 11, "To Set the Jumpers."
CLK2 | P. G. |
| |
OSC |
| ||
|
| ||
CLK1 | P. G. |
| |
CLK2 | J1 | ||
| |||
GLITCH | OFF | ||
| |||
ON |
| ||
|
|
Setting the Jumpers
Result | The glitch on bit 7 is turned on. |