Using the Pattern Generator
Add Program Lines
Add Program Lines
You will need four lines for the "walking ones" program. In this exercise, you will insert two lines after 0001 and complete the walking ones program.
1Highlight the Insert field, and press the Select key two times to add two additional program lines to the listing.
2Using the knob, scroll to the next program line for the next "walking one."
3Highlight the
4Type 0010 in the field, and press the Done key.
5Repeat steps 2 through 4 for program lines 2 and 3 entering 0100, then 1000, respectively.
The "walking ones" program.
| Adding Program Lines |
Result | The "walking ones" program is complete. The pattern generator will output |
| 0001, 0010, 0100, 1000 to the logic analyzer. |