Introduction to Inverse Assembly
View the Assembly Listing
View the Assembly Listing
You can view the captured data in the mnemonic form just as you can view data in the Hex, Decimal, or Binary forms.
1Press the List MENU key.
If you are using a 1670 series analyzer, your listing will be different than the one in the graphic below. This is because you are using a different sample listing and inverse assembler.
Viewing the Assembly Listing
2Highlight the line number field on the left side of the display and use the knob to scroll down through the listing.
If the inverse assembler gets out of sync with the captured data the code will not be translated correctly. To realign the assembler and the data using an HP 1660 series analyzer, place one of the OPCODE F lines at the top of the screen. Then highlight the Invasm Options field, press the Select key, and choose Align from the Inverse Assembly Options