Mixed Mode - Correlation of State and Timing Data
Change a Label Name and Modify Channel Assignments
Change a Label Name and Modify Channel
Assignments
1Press the Format MENU key twice.
2Highlight Format MACHINE 2 in the
3Highlight the top field under Labels, then type TCOUNT using the keypad. Press the Done key when you are finished typing.
4Highlight the field showing the 16 channels of Pod A3, to the far right of the TCOUNT label. Press the Select key.
4If there are asterisks in the
5Press the ⇑
Result | The top label is now the TCOUNT label with the lower eight channels of Pod |
| A3 assigned to it. |
Turn on the TCOUNT Label in the Waveform Menu
The timing data will be displayed in the waveform menu with the state data listed above. Turning the TCOUNT label on in the waveform menu tells the analyzer to display the timing data for TCOUNT.
1Press the Waveform MENU key to display Waveform Machine2.
2If the large vertical field on the left side of the display has TCOUNT 0 through TCOUNT 7 displayed, go to "Clear the Timing Analyzer Trigger" on the next page. Otherwise, continue to the next step.
3Highlight the large vertical field on the left side of the display, and press the Select key twice.
4Highlight Insert in the
5Press the Select key to choose TCOUNT.
6Choose Sequential from the next
Result | The waveform menu is now set to display the timing data for TCOUNT. The |
| sequential option inserted all channels of the label into the display. |