Introduction to Timing Analysis
Modify Channel Assignments
Modify Channel Assignments
In this exercise, you will assign the active bits of pod A1 to the label TCOUNT.
1Using the arrow keys, highlight the field showing the 16 channels of Pod A1, to the far right of the TCOUNT label. Press the Select key.
2Press the Clear Entry key to clear the default bit assignments.
3Use the knob to move the cursor to channel 7 in the
4Press the ⇑
5Press the Done key.
Pod A1 has 16 channels and is connected to the training board.
An asterisk (*) assigns a channel to a label. In this exercise, the lower eight channels are assigned to TCOUNT.
Modifying Channel Assignments
Result | The lower 8 channels of pod A1 are assigned to the label TCOUNT. |