Using the Pattern Generator
Start the Pattern Generator and View the Walking Ones Pattern
Start the Pattern Generator and View the Walking Ones Pattern
When you select Run and Repetitive, the Pattern Generator begins to run in repetitive mode. The output is the repeating "walking ones" pattern. You will not see this output until you switch to the timing analyzer waveform display.
The pattern generator will run independently until you stop it by pressing the Stop key.
1On the front panel of the logic analyzer, press the blue SHIFT key, and then push the Run key to run the pattern generator repetitively.
2Highlight the Patt Gen in the
3Highlight the the Run field, and press the Select key. Choose Single, and press the Select key.
The Timing analyzer runs a single trace and automatically displays the Waveform 1 menu in which you see the "walking ones" patter.
4Highlight the s/Div field.
5Turn the knob until the s/Div field displays 20 ns.
Starting the Pattern Generator and Viewing the Walking Ones Pattern