Contents

Measure the Clock Period Manually 7–8

Measure the Clock Period with Auto Measure 7–9

Read Voltage with the Markers 7–10

8Triggering the Oscilloscope with the Timing Analyzer

Before You Begin 8–3

Set the Jumpers 8–4

 

Connect the Oscilloscope Probe

8–5

Get the Waveform on the Display

8–6

Change the Oscilloscope Trigger

8–7

Turn On the Timing Analyzer 8–8

Set Up the Timing Format Menu

8–9

Define the Timing Trigger Term "Edge 1" 8–10

Set Up the Timing Trigger Specification 8–11

Arm the Oscilloscope with the Timing Analyzer 8–12

Add Oscilloscope Waveform to the Timing Waveforms 8–13

Capture the Glitch with the Timing Analyzer and Oscilloscope 8–14 Align the Glitch Displayed by the Oscilloscope and Analyzer 8–15

9 Using the Pattern Generator

Before You Begin 9–3

 

 

Connect the Pattern Generator 9–4

 

Turn On the Timing Analyzer

9–5

 

Change a Label Name 9–6

 

 

Modify Channel Assignments

9–7

 

Set Up the Timing Analyzer Trigger Term 9–8

 

Add a Pattern Generator Label to the Timing Waveform Display

9–9

Set Up the Pattern Generator Format Menu 9–10

 

Program the Pattern Generator Output 9–12

 

Add Program Lines 9–13

 

 

Start the Pattern Generator and View the Walking Ones Pattern

9–14

Stop the Pattern Generator 9–15

 

ix