Introduction to Inverse Assembly

Filter the Captured Data

 

Filter the Captured Data

Note

This exercise can only be done with the HP 1660C, HP 1660CS,

 

HP 1661C, or the HP 1661CS analyzer.

If the program you are running is large or you are not interested in looking at all of the code, you can suppress the types of instructions you are not interested in. In this exercise you will look at the general flow of the code by showing only the jumps and suppressing all other types of instructions.

1Highlight the Invasm Options field and press the Select key.

2Suppress all of the instruction types, except "Jumps:", by highlighting each field and pressing the Select key.

3Press the Done key to close the Inverse Assembly Options pop-up.

4Use the knob to scroll through the listing of jumps.

 

 

 

 

 

Filtering the Captured Data

Result

The captured data can be filtered in various ways. In this exercise, the

 

inverse assembly code is filtered so that only the jump instructions are

 

displayed.

10-6