Using the Oscilloscope
Delete Channel 2 from the Display
Delete Channel 2 from the Display
You can delete the unused channels to get more display space.
1Highlight the bar on the left side of the waveform area.
2Using the knob, place the cursor on the channel 2 designator (C2), then press the Select key.
3Select Delete from the
This is channel 1 with the waveform of the training board clock signal displayed.
This is channel 2, and it |
|
does not contain data. |
|
Therefore, this channel |
|
can be deleted to allow |
|
more display space for |
|
channel 1. | Deleting Channel 2 from the Display |
|
Result | The unused channel 2 is deleted from the display. The waveform for channel |
| 1 occupies the entire display. |