Advanced State Triggering

Put the Analyzer into State Mode

Put the Analyzer into State Mode

1Press the Config MENU key.

2In the Analyzer 2 box, highlight the field to the right of Type, and press the Select key. Highlight Off in the pop-up menu, and press the Select key.

3In the Analyzer 1 box, highlight the field to the right of Type, and press the Select key. Highlight State in the pop-up menu, and press the Select key.

Result

The analyzer is now in state mode. The lower eight channels and the J-clock

 

channel of pod A1 are showing activity.

6-4