Triggering the Oscilloscope with the Timing Analyzer
Set Up the Timing Format Menu
Set Up the Timing Format Menu
Because you will be making a timing measurement, you will use the TCOUNT label that represents timing count. You will also set the timing acquisition mode to capture the glitch.
1Press the Format MENU key.
2Highlight the SCOUNT label, and press the Select key. Highlight Turn Label Off in the
3Highlight the TCOUNT label, and press the Select key. Highlight Turn Label On in the
4Highlight the Timing Acquisition Mode, and press the Select key. Highlight Glitch, Half Channel, 125 MHz in the
Select key.
The Timing Acquisition Mode set to capture the glitch.
The TCOUNT label that represents timing count.
| Setting Up the Timing Format Menu |
Result | The label TCOUNT is turned on, and the timing analyzer acquisition mode is |
| set to glitch. |