Comparing State Traces
Change the Jumper to Acquire a Different State Listing
Change the Jumper to Acquire a Different State Listing
Changing the glitch jumper changes channel 7 of the counter so that some of the acquired states will not match the original listing. After you change the jumper, you will acquire the data again in the next exercise, then compare it to the data you copied to the Reference Listing.
1Pull the glitch jumper from the pins labeled GLITCH OFF.
2Push the jumper onto the pins labeled GLITCH ON.
CLK2 P. G.
OSC
P. G.
CLK1 CLK2
GLITCH OFF
ON
Result | The glitch jumper is changed to GLITCH ON. The next listing you acquire |
| will be different from the one you copied to the Compare Reference listing. |