Introduction to Inverse Assembly
Load the Inverse Assembler and Sample Listing
Load the Inverse Assembler and Sample Listing
In this exercise you will load a configuration file and the inverse assembler to translate the binary data. You will not be making the measurement because the training board does not have a microprocessor.
1Place the flexible disk labeled "Logic Analyzer Training Kit Configurations" in the disk drive.
2Press the Config MENU key.
3Highlight the field to the right of Type in the Analyzer 1 box. Press the Select key and choose State in the
4Press the System MENU key.
5Highlight the field to the right of System, press the Select key, and choose Flexible Disk in the
6If you are using an HP 1660 series analyzer, load the Analyzer with these files:
•IA386E (inverse assembler)
•TRC_386._A. (sample listing)
7If you are using an HP 1670 series analyzer, load the Analyzer with these files:
•ICPU32 (inverse assembler)
•TRC_32._A (sample listing)
Result | Both the inverse assembler and the listing are loaded onto the analyzer with |
| the necessary configurations. |
See Also | "To Load a Configuration File" in chapter 11 for more information. |