Using the Pattern Generator
Program the Pattern Generator Output
Program the Pattern Generator Output
The Sequence window is used to program the pattern generator output. In this exercise, you will change the base field to binary and program the first "walking one."
1Highlight the Pat Gen Format field, and press the Select key.
2Highlight Pat Gen Sequence field in the
Select key.
3Highlight the base field below the PATGEN field, and press the Select key. Highlight Binary in the
4Use the knob to scroll to the field under
***MAIN SEQUENCE START***.
5Use the arrow keys to highlight the
6Press the Select key. Type 0001 and press the Done key.
| Programming the Pattern Generator Output |
Result | The base field is in binary with the first "walking one" of 0001 programmed. |