Triggering the Oscilloscope with the Timing Analyzer
Arm the Oscilloscope with the Timing Analyzer
Arm the Oscilloscope with the Timing Analyzer
The timing analyzer and the oscilloscope can be configured so that the timing analyzer’s glitch triggering capability will capture the glitch, and then arm the oscilloscope so that it, too, captures the glitch.
1Highlight the Arming Control field at the far right side of the screen, and press the Select key.
2Highlight the field under Scope Arm In, and press the Select key. Highlight Analyzer in the
When you select the analyzer to arm the scope, the field under
Analyzer Arm In changes to Group Run.
3Press the Done key to exit the Arming Control
The timing analyzer starts when Group Run is initiated.
Arming the Oscilloscope with the Timing Analyzer
The oscilloscope is armed by the Timing Analyzer.
Result | The timing analyzer will look for the glitch, trigger, and then arm the scope, |
| which allows the scope to capture the glitch. |