Using the Pattern Generator

Modify Channel Assignments

Modify Channel Assignments

In this exercise you will assign channels 8 through 11 to Pod A1, which is attached to J1 of the training board. The analyzer will then use these channels to capture the output of the pattern generator.

1Highlight the field showing the 16 channels of Pod A1 to the far right of the PATGEN label. Press the Select key.

2Using the knob, move the cursor to channel 11 in the pop-up menu. Then, press the ⇑ (up-arrow) key to put asterisks in channels positions 11 through 8.

3Press the Done key.

The asterisks (*) assign bits 8 through 11 of Pod A1 to the label PATGEN.

 

Modifying the Channel Assignments

Result

Channels 11 through 8 of Pod A1 are assigned to the label PATGEN.

9-7