Using the Pattern Generator
Set Up the Pattern Generator Format Menu
Set Up the Pattern Generator Format Menu
For the pattern generator to output the "walking ones" to the logic analyzer, the lower four bits of Pod 4, which is connected to the training board through the TTL Data Pod, must be assigned to PATGEN.
1Highlight the Analyzer field in the
2If the Format Menu of the Pattern Generator is now displayed, go to step 4.
3Press the Format MENU key.
4Highlight Lab1 below Label, and press the Select key. Highlight Modify Label in the
5Type PATGEN, and Press the Done key.
6Highlight the field showing the Pod B4 to the right of PATGEN, and press the Select key.
The lower 4 bits of Pod B4 are assigned to output the "walking ones" .
Setting Up the Pattern Generator Format Menu