|
|
| EIR608 | |
|
| 7 | ||
6 | IP Configuration | |||
User Name and Password | ||||
|
|
|
| |
|
|
|
|
| o This step should be accomplished by the Network |
| Administrator. |
| o Log onto the switch from a PC connected to the |
| network. |
o Expand the “system tree” and select IP configuration. | o Expand the “System Tree” and select user |
authentication.. | |
o Enter the IP Address, Subnet Mask, and Gateway | o Enter the new User Name and Password. Record this |
provided by your Network Administrator. | information in the space provided below. File this |
o Save the changes. | document for future reference. |
o Disconnect the stand alone PC from the switch and | o Click the Apply button. |
connect the switch to the network. | USER NAME: ______________________________________ |
o Inform your Network Administrator that the IP Address | |
has been changed. |
|
o NOTE: The User Manual contains instructions for | PASSWORD:_______________________________________ |
assigning the IP Address from a DHCP Server and |
|
to allow the switch to act as a DHCP Server. | MAC ADDRESS: ____________________________________ |
| IP ADDRESS: _______________________________________ |
| Basic Configuration is complete. A |
| comprehensive Manual is contained on the CD |
| ROM. Refer to this manual to configure the |
| advanced features of this switch. |
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
