Multi-Tech Systems MT5634ZBAV manual Display Current Settings, Store Current Configuration

4 AT Commands, S-Registers, and Result Codes

Command:	&V	Display Current Settings
Values:		n/a
Description:		Displays the active modem settings, including the
		callback security settings if callback security is
		enabled. If the setup password has been entered, it
		also displays the callback security passwords.

Command:	&Wn	Store Current Configuration
Values:		n = 0
Default:		None
Description:	&W0	Stores current modem settings in nonvolatile
		memory and causes them to be loaded at power-
		on or following the ATZ command instead of the
		factory defaults. See also the &F command.
	&W1	Clears user default settings from nonvolatile
		memory and causes the factory defaults to be
		loaded at power-on or following the ATZ com-
		mand.
Command:	&Yn	Select Stored Configuration for Hard Reset
Values:		n = 0
Default:		0
Description:	&Y0	Select stored configuration 0 on power-up. (For
		backward compatibility with some software.)
	&Y1	Not supported—responds ERROR.

59