Disk upgrade procedures
Booting up the system with the new boot disk drive
Note:
When the upgrade is being supported by remote personnel, such as CMS Provisioning, the system commands in this section are for use by remote personnel to monitor the progress of the upgrade. Run the commands from the local console only when instructed to do so, or when there is no remote support.
To boot up the system with the new boot disk drive:
1.Turn on all external SCSI devices, starting with the device farthest from the system and working toward the system.
2.Turn on the system monitor.
3.Turn the key switch to the vertical “On” position. Do not turn the key switch to the “Locked” or “Diagnostics” position.
key_switch.cdr
4.Close the front door of the system.
The system begins to boot up. One of the following occurs:
●If the EEPROMs are correctly set to recognize the disk boot path, the following messages are displayed:
Cannot open ’/etc/path_to_inst’ Program terminated
ok
Continue with Step 5.
